Etched Copper Antique Finish Earrings WHIMSY

Etched Copper Antique Finish Earrings WHIMSY

‘Whimsy’ Collection Etched Copper Antique Finish Earrings

Individually crafted etched Antique Finish Earrings WHIMSY with Sterling silver ear wires.

These earrings are part of my ‘Whimsy collection of etched copper jewellery. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

Earrings length: 4 cm from top of the wires.

Commissions welcome for Whimsy collection jewellery.

More from the Whimsy Collection

Flame Painted Narrow Etched Copper Cuff WHIMSY

Narrow Etched Copper Cuff WHIMSY - Flame Painted

Etched Copper Cuff ‘Whimsy’

Individually crafted copper cuff WHIMSY.

This bracelet was cut from sheet copper, etched and given a flame painted patina.

The cuff has been etched, then flame painted using a small butane torch and coated using renaissance wax.

This is a one -off cuff which is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

The Copper cuff is a standard fit at approximately 6 inches, Width 1.5 cm.

More jewellery from the Whimsy Collection.

Antique Finish Etched Copper Cuff WHIMSY

Narrow Etched Copper Cuff WHIMSY – Antique Finish

WHIMSY Collection Etched Copper Jewellery

Individually designed and crafted narrow copper cuff bracelet cut from sheet copper, etched and given an antique patina.

The cuff has been etched, then given an antique finish using Liver of Sulphur.

This is a one -off cuff which is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

The Copper cuff is a standard fit at approximately 6 inches, Width 1.4 cm.

More Etched Copper Designs

Handmade to Order – Wide Etched Copper Cuff WHIMSY

Wide Etched Copper Cuff from WHIMSY Collection: Made to Order

Wide Copper Cuff from WHIMSY Collection: Made to Order

Wide Etched Copper Cuff WHIMSY from my ‘Whimsy’ Collection of jewellery.

Individually designed and crafted wide etched copper cuff bracelets cut from sheet copper. The cuff has been etched, then given an antique finish using Liver of Sulphur.

This is a one -off cuff which is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

The Copper cuff is a standard fit at approximately 6 inches, Width 3cm.

More from the Whimsy Collection here

Etched Copper Disc Pendant WHIMSY

Etched Copper Disc Pendant WHIMSY

‘Whimsy’ Etched Copper Disc Pendant

One off Copper Disc Pendant WHIMSY made from a small disc of copper cut from sheet copper.

This simple pendant is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.
I etched the copper sheet then cut it into discs and used my dapping and doming tools to create a gentle dome giving the pendant a 3D feel. The pendant was then given a liver of sulphur antique patina which brings up the pattern.

Pendant Size: 3.8 cm diameter.. This pendant comes on a handmade copper torc necklace like the one in the picture.

Note: If you do not wish to buy the torc necklace and just want the pendant please select ‘Pendant Only’ option from the Available Options section above. The cost of the Torc necklace (£10.00) will be taken off your purchase when you select the “pendant only” option.

Click here for more Etched Copper Designs

More on my blog about etching.

SOLD: ‘Whimsy’ Collection Flame Painted Copper Cuff

‘Whimsy’ Collection Flame Painted Copper Cuff

Individually designed and crafted copper cuff bracelet cut from sheet copper, etched and flame painted.

The cuff has been etched, then flame painted using a small butane torch and coated using renaissance wax.

This is a one -off cuff which is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

The Copper cuff is a standard fit at approximately 6 inches, Width 1.5 cm.

More jewellery from the Whimsy Collection.

SOLD: ‘Whimsy’ Etched Copper Cuff – Flame Painted

Whimsy Etched Copper Cuff - Flame Painted

‘Whimsy’ Etched Copper Cuff

Individually designed and crafted copper cuff bracelet cut from sheet copper, etched and flame painted.

The cuff has been etched, then flame painted using a small butane torch and coated using renaissance wax.

This is a one -off cuff which is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

The Copper cuff is a standard fit at approximately 6 inches, Width 1.5 cm.

SOLD! Etched Copper Cuff WHIMSY

Etched Copper Cuff WHIMSY

Individually designed and crafted narrow copper cuff bracelet cut from sheet copper, etched and given an antique patina.

The cuff has been etched, then given an antique finish using Liver of Sulphur.

This is a one -off cuff which is part of my new “Whimsy” range of etched copper designs. I just made a pattern on the sheet, a doodle if you like, and put it in the etching solution. Welcome to my world where most of my etched patterns are a little whimsical, because I simply do not have the gift of being able to sketch and draw beautiful designs on paper.

The Copper cuff is a standard fit at approximately 6 inches, Width 1.4 cm.