Hammers!

Hammers!

One can never have too many hammers!
So I treated myself to a few more recently 🙂

New Hammers

They will go nicely with the other hammers I have and sit in the tool stand Mr A made for me last year.

hammer stand
Wonderful range of Hammers available to buy on Amazon.co.uk

Learning to Setup the Rolling Mill

Learning to Setup the Rolling MillSo I bought a rolling mill. What next? Learning all about it of course!

Learning to use your tools properly is so important! So once the Rolling Mill had been mounted properly on a sturdy table (it is a heavy piece of kit! Weighs 28 kg.) it was time to get to know its various parts and how they slot in together.

Some of the steps in learning to set up the rolling mill

Learning to Setup the Rolling Mill

The first job was to open it all up and see what part was what.  There are so many different bits that are screwed together to make up the tool.

I took off the gears, those two round things and the one with handle on top. That is the easy bit. They just slide off. Then the screws have to be taken off. Thankfully it comes with the right spanners. And Mr A has a collection of spanners and ratchets in the right size too. If you don’t, they are not too expensive to buy.

Learning to Setup the Rolling Mill

After I had worked out how to use the spanner properly and removed the screw I took the top off.

Learning to Setup the Rolling Mill

The Rolling Mill arrives with a thick coating of heavy duty grease. Make sure you have a roll of kitchen towel handy to wipe off the grease as you go along. Don’t do this wearing nice clothes!

Taking the the top off it exposes the top roller, which is a plain roller. Be careful not to scratch the rollers as any marks could (probably will) transfer to the metal when you roll it.

Learning to Setup the Rolling Mill

Taking out the top smooth roller carefully. Make sure you have enough space around you to put these down safely. And don’t forget, these are rollers and will happily roll off the table so put it in a cardboard box, drawer or a tray.

Learning to Setup the Rolling Mill

Changing the roller to one of the patterned rollers that came with the rolling mill.

Contents of the pack:

My Rolling Mill has 7 rollers: • 2 plain rolls for sheet rolling • 2 wire rolls for wire drawing • 1 roll with cross checks and flat checks • 1 roll with dull and lining • 1 roll with v groove and half round

Plain rolls are already installed in the machine and the rest came individually packed and sealed in little cardboard boxes. There is a generous grease / oil  coating which had to be wiped off with paper kitchen towel. In the picture above I have installed the cross & flat checks roller.

Once I had installed the roller I put it all back together and it worked! 🙂

I have not really used the patterned or wire rolls yet, it will happen another time. I will need practice in using the wire rolls. After I had checked that the patterned roller was setup correctly I opened the mill up again and put it back with the plain roller.

I have had a few sessions and rolled some patterned paper and stickers through the rolling mill so far and made some jewellery. I have a whole lot of things in my stash box that I will try rolling to create more pieces.

One of the first pieces I made using the Rolling Mill – Handmade Paper Texture Earrings 


If you are thinking of buying a Rolling Mill there are several models available to choose from

YAY! I Bought a Rolling Mill!

Rolling Mill installed on my workbench New Toy! I bought a Rolling Mill and I am so excited! 😀

Another view of Rolling Mill installed on my workbenchThanks to the wonderful customers who shopped in my online shop and at the ESC Artists Market in June I was finally able to buy a small Rolling Mill. It will help me create new textures and patterns on my jewellery and sculptures.

I will post more about it as I get to know it better.

First two pieces made with my new toy:

Copper Earrings: Handmade Paper Texture
Copper Earrings: Polka Dots Texture


There are lots of different Rolling Mills available to buy online. Have a Look!

My New Annealing Pan

Mr A has made a new annealing pan for me. 🙂

New annealing pan
My new 3 litre annealing pan

This new workbench accessory is going to make life so much easier when I want to anneal or flame paint larger pieces like my bigger copper trays or if want to anneal 2 or 3 bracelet blanks at the same time.